IEEE 802.1x (Port Based Network Access Control)
Issue 2 July 2005 129
Set the server retransmission
timeout period for all ports
set dot1x server-timeout
Set the authentication period (an
idle time between
re-authentication attempts)
set dot1x re-authperiod
Set the
authenticator-to-supplicant
retransmission timeout period
(the time for the switch to wait
for a reply from the
Authenticated Station)
set dot1x supp-timeout
Set the max-req for all ports (the
maximal number of times the
port
tries to retransmit requests to
the Authenticated Station before
the session is terminated)
set dot1x max-req
Globally enable/disable 802.1x set dot1x system-auth-control
enable/disable
Set dot1x control parameter per
port
set port dot1x port-control
Initialize port dot1x set port dot1x initialize
Set the port to re-authenticate set port dot1x re-authenticate
Set dot1x re-authentication
mode per port
set port dot1x re-authentication
Set the 802.1x quiet period per
port
set port dot1x quiet-period
Set the transmit period per port
(a time interval between
attempts to access the
Authenticated Station)
set port dot1x tx-period
Set the supp-timeout per port (a
time for the port to wait for a
reply from the Authenticated
Station)
set port dot1x supp-timeout
Set the server-timeout per port
(a time to wait for a reply from
the Authentication Server)
set port dot1x server-timeout
In order to... Use the following command...
2 of 3
To Next Page
Loading...
