Stacking (optional)
Issue 2 July 2005 47
!
CAUTION:
CAUTION: Do not cross connect two switches with two Octaplane (light-colored) cables. If
you wish to cross-connect for redundancy, use one light-colored Octaplane cable
and one black redundancy cable. The black cable will then serve as a redundant
connection.
!
CAUTION:
CAUTION: To prevent EMI, cover any unused ports on the stacking modules using the grey
plugs provided. Insert the plug labelled "left" into the lower port; insert the plug
labelled "right" into the upper port. See Figure 12
.
Tip:
Tip: You can build a logical stack of up to ten C360 switches. If you do not wish to
stack all the switches in a single rack, use long Octaplane cables to connect the
two physical stacks.
Figure 11: C360 Stacking Connections
To Next Page
Loading...
