Avid Technology FastServe Live Edit - Checking the Hardware Key

52
## Codec boards map
## C[logical_board_num]=[physical_board_num] - Map physical boards in PCI
enumeration to OVS logical boards
## logical boards are enumerated internally in bottom up order by appearance
## the logical_board_num is actually redundant, physical_board_num < 0 means a
boa
rd not to be used
## M=[logical_board_num] - Clean mixer board number (H!=M)
## H=[logical_board_num] - OSD helper board number (H!=M)
## A=[logical_board_num] - AES master input board number
## E=[logical_board_num] - Embedded master input board number
## L=[physical_board_num] - LTC internal board number
C0=3
C1=2
C2=1
C3=0
M=0
H=1
A=2
E=3
L=2
J=0
#G=-1
B=4
4. To save and exit the file, type
:wq!
and press Enter.
5. Reboot your FastServe | Live Edit or FastServe | Ingest server.
Checking the Hardware Key
If after the installation, the /usr/bin/licdvg-getsystemid-LL is missing, download it and create a HW
key (hardware identifier for existing boards).
To download the /usr/bin/licdvg-getsystemid-LL component and create the HW key:
t Enter the following commands:
Copy the file to /usr/bin
chmod 755 /usr/bin/licdvg-getsystemid-LL
/usr/bin/licdvg-getsystemid-LL > /usr/dvg/id
cat /usr/dvg/id