Avid Technology FastServe Live Edit - Updating Vscommander; Updating Airspeedtranslator; (Option) Increase Log Level in Vscommander and Airspeedtranslator

61
Updating VSCommander
To update the VSCommander to its latest version, follow the steps listed in this procedure.
To update VSCommander:
1. Copy the VSCommander installer to /data/public and install it:
Copy the VSCommander-2018.XX.X.XXXX-9d3e198.el5_5.x86_64.rpm build to /
data/public
rpm -e VSCommander
rpm -Uvh /data/public/VSCommander-2018.12.1.5094-9d3e198.el5_5.x86_64.rpm -
-force
2. Check what version of VSCommander is installed on system:
rpm -qa VSCommander
3. (Option) Increase the log level to INFO or DEBUG.
Updating AirSpeedTranslator
If you need to update the AirSpeedTranslator component, follow the steps listed in this procedure.
To update the AirSpeedTranslator component:
1. Copy the AirSpeedTranslator installer to /data/public and install it:
Copy AirSpeedTranslator-2018.XX.X.XXXX-6f65b0c.el7.x86_64.rpm to /data/
public
rpm -e AirSpeedTranslator
rpm -Uvh /data/public/AirSpeedTranslator-2018.11.1.430-
6f65b0c.el7.x86_64.rpm
--force
2. Check what version of AirSpeedTranslator is installed on your system:
rpm -qa AirSpeedTranslator
3. Restart the server:
/data/VS/bin/set_run -a all
(Option) Increase Log Level in VSCommander and
AirSpeedTranslator
Optionally, you can increase the log level to INFO or DEBUG for the VSCommander and
AirSpeedTranslator components. Follow the steps below.
To increase the log level:
1. (Option) Increase the log level to INFO or DEBUG for AirSpeedTranslator and VSCommander.
a. vim /data/VSCommander/co
mmander.xml
b. change <Log Debug="No" DebugLevel="0" WriteInBackground="Yes">
to <Log Debug="Yes" DebugLevel="200" WriteInBackground="Yes">.