Avid Technology FastServe Live Edit - Installing the Latest OVS Build

60
8. For version 18.9.0_15, check the current logging mask after installing:
a. Check the current logging mask:
avidfos_ctrl -l
b. Change the logging mask to 0x1200024b.
avidfos_ctrl -s 0x1200024b
c. Check the current logging mask after change:
avidfos_ctrl -l
9. Restart the AvidNEXISClient:
systemctl restart avidfos
10. (Optional) Reboot the server.
Installing the Latest OVS Build
If you need to update the OVS build on your server, follow the steps listed in this topic.
To install a new build of the OVS component:
1. Stop the FastServe server:
/data/VS/bin/set_run -s all
2. Download the latest version of the OVS component to /data/public and extract the file:
Copy the OVS_CS7_2019.XX.XX.XX.tgz build to /data/public
tar -xvzf /data/public/OVS_CS7_2019.XX.XX.XX.tgz -C /data/VS/bin/
3. Start the server:
set_run -a all
4. Install the latest OVSCommander build:
/data/VS/bin/set_run -s all
Copy the OvsCommander_install_CS5_XXXX.XX.XX.XXX.tgz build to /data/public
rm -frv /data/VS/bin/OVSCommander/bin/*
tar -xvzf /data/public/OvsCommander_install_CS5_2018.12.0.128.tgz -C /data/
VS_INSTALLS/
/data/VS_INSTALLS/OvsCommander_install_CS5_2018.12.0.128/install.sh /data/
VS/bin/OVSCommander/ -
-reinstall-firebird
5. Check if FireBird is running properly and if the installed version of OVSCommander is correct:
pstree | grep fb_smp_server
/sbin/service firebird status
ll /data/VS/bin/OVSCommander/installers/current
cat /data/VS/bin/OVSCommander/installers/current/OvsCommander.version