57
Updating the AvidRegistry
Update the AvidRegistry to avoid network issues between Avid NEXIS and the FastServe | Live Edit
/ FastServe | Inges
t server. Follow the steps described here in the Re-installing NEXIS Client chapter.
Make sure the correct eth port is entered.
The configuration entered here needs to match your current
network setup. If the eth2 interface is selected for transfer is, then eth2 should be set here as well.
You might encounter NEXIS export issues if this configuration does not match.
Final Steps
Now, compare the content of t
he newly created or updated files with the files saved in the latest
backup. You can now safely start the OVS engine:
/data/VS/bin/set_run -a all
To Next Page
Loading...
