Avigilon H5A Series - Page 18

57 pages

To Next Page

To Previous Page

1. Remove the 4 screws holding the mounting feet in position.

2. Rotate the mounting feet 180° so they match the image below. Connect the mounting feet to the main

unit using the 4 screws.

Changing the Mounting Feet Position 18

Main Page

Table of Contents5
Overview8
Main Unit8
Front View8
Rear View9
Bottom View10
DIN Rail Mount View10
Micro Bullet Imager11
Micro Bullet Imager View11
L-Bracket and Micro Bullet View11
Right Angle Imager12
Right Angle Imager View12
Optional Accessory Flat Bracket View13
Preparing the Installation14
Modular Camera System Setup14
Mounting and Aiming Video Analytics Cameras14
Recommended Use of HD BNC Cables15
Main Unit Installation16
Required Tools and Materials16
Main Unit Package Contents16
Mounting on a Flat Surface or Table16
Mounting the Unit to a Wall17
Changing the Mounting Feet Position17
Mounting to a Wall19
Mounting the Unit on a DIN Rail20
Cable Connections22
Connecting the Ethernet and HD BNC Cables22
Connecting External Power23
Connecting to External Audio and I/O Devices23
Micro Bullet Imager Installation25
Required Tools and Materials25
Imager Package Contents25
Using the L-Bracket Mounting Adapter25
Positioning the Micro Bullet Imager in the L-Bracket25
Mounting the L-Bracket27
Mounting through the Mounting Surface30
Mounting to a Thin Metal Sheet32
Right Angle Imager Installation35
Required Tools and Materials35
Imager Package Contents35
Mounting through the Mounting Surface35
Installing with Mounting Screws35
Installing with the Adhesive Strip37
Mounting the Imager Onto a Surface38
Installing with Mounting Screws39
Installing with the Adhesive Strip40
Mounting through the Mounting Surface with the Bracket41
Installing with Mounting Screws42
Installing with the Adhesive Strip44
Mounting the Imager and Bracket Onto a Surface45
Installing with Mounting Screws46
Installing with the Adhesive Strip47
Connecting to the Camera49
Initializing a Camera Username and Password49
(Optional) Using the USB Wi-Fi Adapter49
Assigning an IP Address50
Accessing the Live Video Stream50
(Optional) Configuring Onboard Storage50
Configuring the Camera51
For more Information51
Main Unit LED Indicators52
Connection Status LED Indicator52
Troubleshooting Network Connections and LED Behavior52
Imager Connection LED Indicators53
Troubleshooting Imager Connections and LED Behavior53
Resetting to Factory Default Settings54
Setting the IP Address Using the Arp/Ping Method55
Cleaning56
Micro Bullet Imager Lens Bubble56
Imager and Main Unit Body56

Avigilon H5A Series - Page 18

Table of Contents

Related product manuals