Micro Bullet Imager Installation
Required Tools and Materials
The following tools are required to complete the installation but are not included in the package:
l
A modular camera main unit and an HD BNC cable. For more information, see Modular Camera
System Setup on page14.
l
Appropriate tool for cutting the entry hole in the mounting surface
l
No. 2 Phillips screwdriver — for attaching the imager or bracket to a mounting surface
Imager Package Contents
Ensure the micro bullet imager package contains the following:
l
Avigilon H5A Modular camera micro bullet imager
l
L-shaped mounting bracket and mounting screws
l
1x double-sided mounting adhesive strip
l
1x side mounting screw
l
1x lens securing trimring — for securing the imager through a hole in the mounting surface.
Using the L-Bracket Mounting Adapter
If the imager needs to be installed onto a flat surface, use the supplied L-bracket mounting adapter.
Positioning the Micro Bullet Imager in the L-Bracket
The position of the collar on the L-bracket mounting adapter that the micro bullet imager mounts onto can be
adjusted to suit your installation environment. If necessary, you can move the position of the collar from the
top to the bottom of the L-bracket.
Micro Bullet Imager Installation 25
To Next Page
Loading...
Need help?
General
