Azbil C35 Series User Manual

5-48
Chapter 5. DETAILED DESCRIPTION OF EACH FUNCTION

STEP operation LSP, PID group No., ramp, time
The SP change and PID group No. by step of the step operation can be set.
Item (Bank) Display Contents Initial value User level
SP (for LSP1)
(SP bank)
SP low limit (
C07
) to SP high limit (
C08
)
0 Basic,
Standard,
High function
PID group No. (for LSP1)
(SP bank)
1 to 8 1 Standard,
High function
Ramp (for LSP1)
(SP bank)
0.0U: No ramp.
0.1 to 999.9U
(The time unit of the ramp is selected in
the SP ramp unit.)
0.0
Time (for LSP1)
(SP bank)
0.0 to 999.9s
(The time unit of the step operation is set
at “0.1s”.)
0 to 9999s
(The time unit of the step operation is set
at “1s”.)
0 to 9999 min
(The time unit of the step operation is set
at “1min”.)
0.0
SP (for LSP2)
(SP bank)
Same as SP-1. 0 Basic,
Standard,
High function
PID group No. (for LSP2)
(SP bank)
1 Standard,
High function
Ramp (for LSP2)
(SP bank)
0.0
Time (for LSP2)
(SP bank)
0.0
SP (for LSP3)
(SP bank)
Same as SP-1. 0 Basic,
Standard,
High function
PID group No. (for LSP3)
(SP bank)
1 Standard,
High function
Ramp (for LSP3)
(SP bank)
0.0
Time (for LSP3)
(SP bank)
0.0
SP (for LSP4)
(SP bank)
Same as SP-1. 0 Basic,
Standard,
High function
PID group No. (for LSP4)
(SP bank)
1 Standard,
High function
Ramp (for LSP4)
(SP bank)
0.0
Time (for LSP4)
(SP bank)
0.0
(Continue on next page.)

Azbil C35 Series Specifications

General

Brand	Azbil
Model	C35 Series
Category	Controller
Language	English