Date Rev. Revised pages Description
Feb. 2006 5
5-1
5-2
5-5
5-8
5-105
13-2
Manual name changed.
PV input range type: this item transferred from page 5-2.
PV range tables totally changed.
Explanation changed in the first item of Handling Precautions.
Explanation changed.
Adjusting procedures (1), table: Applicable PV range type changed for
Wiring status 1.
Note added to the section on key lock, communications lock, and loader lock.
DC current input: “Allowable input current: Max. 30mA” added.
June 2006 6
v
4-11
5-2
5-39
5-64
5-97
5-101
6-4
6-17
Manual name changed.
Section 4-2 Recommended Cables added.
PV input range table (Thermocouple) and
PV input range table (RTD): range (Fahrenheit) added.
PV multi-ramp table: user level item high function to standard changed.
Table added in the two item of Handling Precautions.
User level table: Initial value item 0 to 1 changed.
User Function bank: explanation added.
rmP.1 to rmP.8 user level item: 2 to 1 changed, tIm.1 to tIm.8 user level item: 2
to 1 changed.
C79 user level item: 0 to 1 changed.
Nov. 2006 7
1-3
3-1 to 3-4
3-5
5-49
5-51
5-85
6-30
13-6
13-7
Soft cover added.
Layout changed. Old 3-1 to 3-6 page.
Using a soft cover: this item was added.
Flow chart for “Input bit function is not used”: polarity added.
Set value No.8: “(Note 1)” deleted.
Set value No.7: “(Note 1)” added.
Contents No.6 of
Out type: “(PV-SP)” added.
Contents of ROM ID: 2fixed.
Applicable standards: EN61326-1 changed to EN61326.
Soft cover added.
Mar. 2007 8
1-1
5-26
5-31, 5-107
13-2
Various clarifications.
Standards compliance: EN61326-1 changed to EN61326.
Note of AT derivative time adjustment coefficient: added.
Initial value of At-d: changed.
Item 1 added.
Input impedance of DC voltage input: 1MΩ changed to Min. 1MΩ.
Apr. 2007 9
5-99 Lighting range of deviation graph: -100.1% or less changed to -100.0% or less.
Jan. 2008 10
v, vi
D-1 to D-8
5-2
5-9
9-11
13-2
Description on SDC35/36 Quick Reference Guide added.
SDC35/36 Quick Reference Guide added.
Note *3,*4 added.
2nd item of Handling Precautions changed.
Remarks of item input alarm status: Description added.
Allowable input voltage added.
To Next Page
Loading...
