Seats and Storage Facilities
Return of seat
1. Adjust the seat belt so that the backrest does not
get stuck in the seat during recovery.
2. Pull the unlocking handle on the rear of the
backrest to unlock, return the backrest to the
service position and reset the unlocking handle.
3. Gently shake the backrest back and forth to
ensure that the backrest is locked into place.
● It is very dangerous to sit in the luggage area.
In a collision accident, a passenger sitting in
this area may suffer from serious injuries or
even death.
● Ensure that every occupant in the vehicle is
seated in the seat and their seat belts are
properly fastened.
● In case of collision accident, if the seat is not
properly locked onto the anchorage, the
occupants may be injured. It is important to
ensure that the seat remains fully locked.
● To prevent personal injury, passengers are
not allowed to sit in the rear luggage area or
fold the rear seat to sit there.
● The rear luggage space is only used for
carrying items, not a passenger seat.
Passengers should sit on their seats and
fasten their seat belts.
Seat temperature control *
The seat heating can be turned on/off through
Infotainment screen > A/C Control Interface > Seat
Temperature Control Interface.
/Ventilation Function.
● The seat heating is divided into four gear
positions: high, medium, low and off. When the
Start/Stop button is in the "RUN" mode, press the
seat heating button, and the three indicator light
of the button will go on, and the seat temperature
will be in the highest gear. When the button is
pressed again, the indicator will go out in turn
from top to bottom, and the seat temperature will
decrease by one gear, and so on, the switch button
will be operated in a cycle.
Rear A/C
To Next Page
Loading...
