BAIC BJ60 Series - AVM Sunroof

AVM sunroof*
083
1
2
3
4
5
6
7
8
AVM sunroof*
AVM sunroof switch
①
sunroof switch
②
sunshade switch
When the Keyless Start/Stop button is on the "RUN"
mode, the sunroof can be opened, closed and tilted by
operating the Sunroof switch
①
, and the sunshade
can be opened and closed by operating the Sunshade
switch
②
.
Warning
● In order to ensure safe driving, driver are
prohibited from sunroof switch during
vehicle driving.
Hint
● One-button automatic can be turned on/off
if the button is toggled for no more than 0.25
seconds, and manually turned on/off if it is
pressed and held for more than 0.25 seconds.
Tilting ventilation on/off
The Start/Stop button is on the "RUN" mode. When
the sunroof is in the closed state, move the Sunroof
switch
①
backward to raise the rear part of the
sunroof, tilts it to the open position and stop
automatically.
When the sunroof is in the tilted ventilation state,
press and hold the Sunroof switch
①
forward to close
the sunroof automatically.
Sunroof open
Keyless Start/Stop button is located at
During "RUN" mode:
● When the Sunroof switch ① is moved backward,
the sunroof will start to move from the closed
position to the tilted position. When the Sunroof
switch ① is moved backward again, the sunroof
will first move to the middle comfortable
position. At this time, move it backward again,
and the sunroof will be opened to the fully open
position.
During the operation of the sunroof, if the Sunroof
switch
①
is moved forward, the sunroof will stop
sliding.
● Press and hold the Sunroof switch ① backward,
the sunroof will start to move from the closed
position to the tilted position, then slide back to
open it, and release to stop.
Note
● When both the sunroof and the sunshade are
turned off, pressing the Sunroof switch ①
backward will turn on the sunshade first.