How to Check Tire Pressure?
Besides the tire pressure monitoring system, tire
pressure can also be checked with high-quality
pocket-type tire pressure gauge. It is not possible to
determine whether the tire pressure is normal by
visual checks alone. Even if not adequately inflated,
radial tires still look very normal. check inflated tire
pressure when they are cold. The cold state means the
vehicle has been stopped for more than three hours or
travelled no more than 1.6 km.
Remove the valve cap from the valve core of the tire,
press the tire pressure gauge to the valve with force,
and then the tire pressure will be displayed. No
adjustment will be needed if the inflated pressure of
the tire in a cold state meets the recommended
pressure value on the tire and loading information
label. If the pressure is too low, inflate it to the
recommended value. If the pressure is too high, bleed
the air by pressing the valve until it reaches the
recommended pressure.
After the check is completed, be sure to screw the
valve cap back on the valve core. The valve cap can
prevent dust and moisture from entering the tire.
Tire puncture
Your vehicle is equipped with treadless tires. When
the tires are punctured by a sharp object, there may
not be apparent air leakage in the tires. If you spot
such a situation, immediately slow down and drive
carefully. Replace the punctured tire with a spare tire
or repair it.
As this type of puncture will reduce the tire pressure,
it is very important to check the atmospheric pressure
regularly. Punctured or damaged tire must be repaired
immediately or replaced as soon as possible.
Concealed damage
Damage to tire and rim is often not easy to find. If
abnormal vibration or deviation of the vehicle is
found during vehicle driving, a tire may be faulty. In
this case, you should go to the authorized dealership
of BAIC ORV for tire inspection as soon as possible.
● As the adhesion on the road for the new tires
is impossible to reach the best state within
the first 500 km, the vehicle must be
operated carefully at an appropriate speed,
so as to avoid accidents.
● Insufficient road adhesion of without
running-in tire or excessively worn tire can
directly affect the braking effect.
● Do not continue driving after the tires are
damaged, otherwise it is very easy to cause
accidents, because the damaged tire may
burst during driving, resulting in traffic
accidents and injuries.
● The tire pressure must comply with
regulations, otherwise it may cause
accidents. If the tire pressure is insufficient,
the vehicle will continue to run at high
speeds, causing the tire to flex. This can
easily lead to overheating of the tire, which
can lead to tire burst.
● Never use tires that have been damaged or
worn to the tire tread wear mark, and
replace such tires in time.
To Next Page
Loading...
