● The blind spot monitoring system can only
alert the driver of the blind spot risk through
alarm. It cannot completely replace the
driver to monitor the traffic state. The driver
should always be alert to the surroundings
and take over the control vehicle in time.
● The blind spot monitoring system cannot
detect objects behind other vehicles or
obstacles.
● The blind spot monitoring system may send
warnings for nonexistent risk of collision.
Please be alert and always focus on the
traffic conditions so as to predict if any
measure should be taken.
● When the vehicle behind moves too fast or
too slow, the function may not be able to send
an alarm in time.
● When the blind spot monitoring system fails,
the corresponding indicator light on the
instrument is always on in red or flashes in
red.
HUD
*
The HUD displays include basic information, ADAS
information, 2D navigation information, telephone
information and navigation information.
Instructions for use of HUD
Through the instrument, you can turn on/off the HUD
display, select the HUD theme (full display theme,
compact theme, off-road theme); Select the color
mode: dark mode (snow mode) or light mode (normal
mode); Adjust the display brightness; Adjust the
display height.
● The light-transmitting area of HUD is the
image output port. If blocked by foreign
objects, the clarity and integrity of HUD
image may be affected.
● Do not place any foreign objects on the HUD
transparent cover, or it may be damaged.
● Do not touch the HUD transparent cover by
hand.
● If there are particles such as sand on the
upper surface of the HUD transparent cover,
use a vacuum cleaner to remove the particles
before cleaning.
● When using the dust remover, ensure that
the dust remover does not collide with the
HUD transparent cover, which may cause
transparent cover scratches.
To Next Page
Loading...
