Dashcam*
Dash-cam SD card
As the dashcam does not include the built-in storage
device, it only works when a separate SD card is
inserted. Otherwise, it does not record. The SD card
mounting location is on the left side of the side mirror
cover.
SD card specification requirements
The SD (MiniSD) card needs to be purchased by the
user. Due to the dashcam of storing data at high speed
for a long time, in order to ensure the dashcam
performance and reliability and protect your personal
interests, be sure to use a regular brand SD card with
storage capacity of 8-128 GB and a transmission level
of class 10 or above.
If the SD card is not in the FAT32 format, you must
format the document system of the SD card as FAT32
before use. There are two ways of format in the
following:
● Format via dashcam: Insert the SD card into the
dashcam (located on the left side of the side
mirror cover). After inserting the SD card, open
the dashcam APP, enter the settings menu, and
select the "Format SD Card" command to
complete the formatting.
● Format by computer: Insert the SD card into the
computer through the card reader and select the
format command, select the file system "FAT32",
the size of the allocated cell should be more than
4KB (usually the default is OK), select the default
values for other options.
Storage duration (1080P)
● All functions of the dashcam are realized
with the correct SD card. If you do not use
the SD card as required, the system may not
work properly and cause system failure!
● Since SD card is a consumable, and there are
many fault conditions, the system will only
indicate typical fault conditions, which
cannot cover all fault conditions. The driver
is responsible to confirm whether the
dashcam is working properly during use.
To Next Page
Loading...
