EasyManua.ls Logo

BAIC BJ60 Series - Engine Coolant Warning Light

BAIC BJ60 Series
349 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
048
Cab
1
2
3
4
5
6
7
8
Engine Coolant Warning Light
The high engine water temperature indicator is
located in the engine tachometer. When the engine
coolant temperature is too high, this indicator light
will go on. In addition, the LCD display will show
prompt information, which is synchronized with the
high engine water temperature indicator, and there
will be an audible alarm at the same time. Stop the
vehicle and turn off the engine as soon as possible,
and check the coolant level and coolant lines for
leaks.
Left and right turning indicator
lights
When turning on the turn signal through the light
control handle, the indicator lights
or
on the
corresponding side of the instrument panel will flash
and emit a rhythmic prompt sound.
Hint
If the indicator light flashes faster than normal
or remains lit up but does not flash, please check
whether the bulb or circuit of the turn signal is
faulty.
Information display area
The information display area equipped with this
vehicle defaults to displaying the vehicle image, and
the corresponding vehicle is displayed in the menu
Information, interface includes:
Multimedia
Trip computer
Setting
Alarm inquiry
Navigation
Environmental information
Vehicle information
The interface can be switched and set through the
"OK" and "Back" button on the left of the turning
wheel; The prompt and alarm information screen will
be automatically called up according to the state of
the vehicle.
Hint
When the instrument cluster display is at low
temperature, it may experience screen delay
or whitening, which is normal.
Sport Mode

Table of Contents

Related product manuals