Remote control parking with the mobile phone*
● This system is mainly suitable for parking
spaces with standard and clear parking
lines. For parking spaces with severely worn
parking lines, strong ground reflection,
shaded by trees or buildings, as well as color
tile parking spaces, the recognition rate is
low, and it is not recommended to use the
APA in similar scenarios.
During APA, the following conditions can cause the
APA to exit:
● Touch the Exit button in the upper left corner of
the display screen to exit.
● The user intervenes in the turning wheel, gear
position and AUTOHOLD switch during parking.
● During parking, the pause time of the system
exceeds 60 seconds, or the time of the whole
parking process lasts for more than 3 minutes.
During APA, the following conditions can cause the
APA to pause:
● Release the seat belt.
● Open the trunk lid.
● The door is turned on.
● Obstacles are encountered during parking.
● Users are required to be ready to take over
the vehicle at all times through brake and
turning wheel to ensure safety.
● During parking, the user may control the
speed with the brake.
Remote control parking with
the mobile phone*
Introduction to mobile remote
parking
This system is controlled by the Bluetooth that
connects the T module to the mobile phone. Please
make sure that the mobile phone Bluetooth is turned
on and connected to the vehicle successfully.
This system only supports remote control parking in
the horizontal parking space and the vertical parking
space.
Remote parking via mobile phone
APP
1. After selecting the parking space, click the remote
parking button.
2. Click the Remote Control Parking, and the
display screen will jump to the interface of
Remote Control Parking. Prompt the user to
"Please engage P gear and turn on the mobile APP
and connect Bluetooth". After the Bluetooth is
successfully connected, the user will be prompted
to get off the vehicle with the key for remote
control.
3. The user opens the mobile phone Bluetooth and
the Off-Road APP. After the Bluetooth
connection between the mobile phone and the
vehicle is successful, it will automatically jump to
the remote parking interface. After the user
follows the prompts of the APP and presses and
holds the "Start Parking" button, the remote
mobile phone parking function is activated.
To Next Page
Loading...
