Windshield wiper
The control part of the front windshield wipers is a
function contained in the rear right multi-functional
operating lever on the steering wheel.
Point Wiping
Push the right multi-function control handle in the
"OFF" position along the direction shown in the
figure-arrow A- to realize the front wiper inching,
which the wiper will be wiped once after one control
handle is operated. After the upward push action is
completed, the operating lever will automatically
reset.
AUTO position (intermittent wiping) and
continuous wiping
Press the right multi-function control handle down to
1 gear in the "OFF" position along the direction of
arrow B as shown in the figure, set the windshield
wiper to AUTO gear, and adjust the wiping speed
automatically according to the rainfall (intermittent
wiping is performed for some models without AUTO
gear); Press down gear 2 to start low-speed
continuous wiping; Press down gear 3 means high-
speed continuous wiping.
LO
When the control handle is shifted to "LO" gear, the
front wiper wipes slowly.
HI
When the control handle is shifted to "HI" gear, the
front wiper wipes quickly.
Windshield cleaning
Toggle the right multi-function control handle along
the direction of -arrow C (towards the driver's arms)
as shown in the figure, and the front windshield
washer nozzle sprays windshield cleaning agent, then
the wiper will wipe for several times automatically.
If the START/STOP button is turned off during the
cleaning of the windshield cleaner, the wiper will
continue to run until it returns to its original position.
In washing and wiping mode, if the position of the
wiper control lever on the right side changes, then the
corresponding function will be executed. The
exceptions include: If the intermittent mode is
selected, the wiper will only start to enter the
intermittent mode after completing the corresponding
washing and wiping mode.
When the washing and wiping cycle ends, if the wiper
control lever is in any position other than ““OFF””,
then the wipers will continue to execute the
corresponding mode after completing the washing
and wiping cycle.
To Next Page
Loading...
