EasyManua.ls Logo

BAIC BJ60 Series - Tire Information

BAIC BJ60 Series
349 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
294
Tire
1
2
3
4
5
6
7
8
When to replace new tires
All original tires are marked with a wear indication,
which locates in narrow strips inside the grooves of
the tread and is distributed on the circumference of
the tire. On the road side of the tires, there are small
triangle signs indicating the position of the marks.
When the tread pattern has been worn to the
indication mark, the tires should be promptly
replaced.
Hint
If the tire wear is uneven (only worn on one side)
or excessively worn, you shall go to the
authorized dealership of BAIC ORV for wheel
alignment.
If any of the following situations occurs, tires will
need to be replaced:
The tire wear indication mark is worn.
The cord or cord fabric in the tire can be observed
directly.
The tread or tyre wall is cracked, and the crack is
so deep that the cord fabric or cord thread can be
seen.
Tire bulge, uplift, or delamination.
The tire is punctured, scratched or otherwise
damaged, and the damaged size and position are
difficult to repair.
Tire Information
There is a nameplate about tire information on the B-
pillar on the driver side, which shall be inflated
according to the tire pressure specified on the
nameplate.

Table of Contents

Related product manuals