EasyManua.ls Logo

BAIC BJ60 Series - Brake Fluid

BAIC BJ60 Series
349 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
278
Brake fluid
1
2
3
4
5
6
7
8
Brake fluid
The Function of Brake Fluid
Brake fluid are used to transmit power in vehicle
hydraulic brake system.
Warning
The brake fluid is corrosive - please keep
container tightly sealed and out of reach of
children. In case of accidental ingestion of
brake fluid, seek medical advice
immediately.
Avoid contact of skin or eyes with brake
fluid. In case of contact, rinse immediately
with plenty of water.
Do not splash brake fluid on hot engine;
otherwise, a fire may occur.
When in use, the liquid level of the brake liquid tank
may slightly drop due to the wear of the brake lining.
If this does occur, you may decide whether to
immediately add any brake fluid based on the brake
fluid level. If the brake pedal stroke unexpectedly
lengthens or the brake fluid level drops significantly,
contact the authorized dealership of BAIC ORV
immediately. If the brake fluid level is below the
minimum mark of the storage tank, do NOT drive the
vehicle.
Note
Brake fluid must be completely replaced every
two years.
Warning
Failure to change the brake fluid according to
the specified time may cause the brake system to
fail, causing serious accidents and personal
injuries.
Brake fluid level
The brake fluid level must be checked according to
the cycle as specified in the Warranty Manual.
When the engine is not running is the best time to
check whether the brake fluid level is within the
marked range on the side of the storage tank.
"MAX" means brake fluid maximum mark.
"MIN" is the minimum mark for the brake fluid.
The brake fluid level shall be located between the
maximum mark and the minimum mark.

Table of Contents

Related product manuals