When the backup camera is started, if the system
detects fault information, the infotainment screen will
display the prompt interface indicating a fault.
Conditions affecting the rear view of reverse
● In a storm or fog.
● The surface of the camera is frozen or stained
with dirt, dust and snowflakes.
● Reverse at night.
AVM*
Introduction to AVM
The AVM is a kind of comfort system, which consists
of four wide-angle camera and a AVM system
controller mounted around the body. AVM system
can assist the driver in reversing, parking or turning
by providing a clear view of the vehicle's
surroundings, thus extending the driver's field of
vision and assisting the driver in driving.
● The AVM can only display 2D images on the
screen, and it is difficult or impossible to
identify protrusions or potholes in the road
surface through AVM due to the lack of
spatial depth Always observe the
surroundings of the vehicle.
● Due to AVM system resolution, some objects
cannot be displayed or cannot be clearly
displayed, such as thin isolation columns,
grilles and trees.
● The AVM may deform the outline of objects
on the screen, and relying on AVM to
estimate the distance between the vehicle
and obstacles (vehicles, pedestrians, etc.)
may be inaccurate, which may lead to
accidents
● There are still a few blind spots in the AVM.
Always observe the surroundings of the
vehicle.
● The width of the parking space shall be at
least equal to or greater than the width of the
track extension.
● Please use the AVM only when the trunk lid
are completely closed, the left and right side
mirror are unfolded naturally, and the left
and right front doors are normally closed.
To Next Page
Loading...
