The 360° camera does not work or is limited in
the following cases:
● The door is turned on.
● Side mirror folding.
● The trunk lid is not closed.
● Heavy rain, snow or fog.
● At night or in places with very low light.
● The camera is exposed to bright light.
● The area is illuminated by fluorescent or
LED lighting (central control display screen
will flicker).
● Driving into a garage with a heating system
in winter and experiencing rapid
temperature changes.
● If the components of the mounting camera is
damaged, please check the position and
calibration of the camera at the authorized
dealership of BAIC ORV.
● The AVM camera is installed outside the
vehicle compartment and is easily covered
by dirt. If the video is not clear, it is
recommended to wipe the lens manually
with a soft cloth.
The AVM consists of the following main functions:
The controller seamlessly stitches images of four
camera placed around the body to create a 360°
AVM. The display effect is similar to the image taken
from the air, which can present the images around the
body 360°.
In the AVM surround view image system, when
touching the camera buttons around the AVM trolley,
the single view area can be switched to the
corresponding view.
Please be aware of the perimeter of the vehicle
To Next Page
Loading...
