Use of AVM
AVM switch
There are AVM switch buttons in the switch buttons
of the infotainment screen and auxiliary instrument.
Press the switch button to turn on the AVM. When
the system is turned on, press the switch button again
or click the exit button in the AVM interface of the
center control screen to turn off the AVM.
Turn On/Off AVM Method
● Shift the gear to the "R" position, the AVM is
automatically turned on; After exiting the R
position, if there is no other operation, the AVM
will be automatically turned off after 5 seconds.
● When the vehicle is not in R position and the
speed is less than 25 km/h, press the AVM switch.
● Voice on/off when the speed is less than 25 km/h
and the gear is not in R position.
● When the speed is less than 15 km/h and the gear
is not in R position, the AVM can be
automatically activated when the obstacle is
detected.
● When the speed is less than 25 km/h and the gear
is not R, the AVM can be automatically turned on
by turn signal or detected obstacle, and will be
turned off after the turn signal is turned off.
● When the APA is working, the AVM interface is
on.
● In non-"R" position and creep mode, press the
"Exit" button or switch button on the left side of
the display screen to turn it off.
● Being not the "R" position with the vehicle speed
greater than 30 km/h, the AVM is automatically
turned off.
To Next Page
Loading...
