● Improper use of the jack may cause serious
injuries.
● Only use the jack on a hard and flat ground.
● The attached jack can only be used to
replace wheels of this vehicle. It cannot be
used to lift other heavy objects or vehicles.
● Do not start the engine when using the jack;
otherwise, accidents may occur.
● When lifting the vehicle with a jack,
remember not to place any part of your body
under the vehicle to avoid accidents.
● If it is really necessary to work under the
vehicle, a suitable protective support must
be placed under the vehicle.
● The wheel nut must be tightened correctly
according to the specified tightening torque.
Otherwise, the nut may become loose when
the vehicle is running, which may cause
accidents easily.
● Tighten the wheel nut with the provided
wheel assembly removal wrench, but the
torque cannot be guaranteed. Reasonably
control the speed during driving, avoid rapid
acceleration and emergency brake, and go to
a professional site as soon as possible to
check and ensure that the wheel nuts is
tightened to the specified torque. The wheel
nut torque is (140±10) N·m.
After use, the jack must be put back to its
original place. Also pay attention to the
supporting angle of the jack and ensure that the
jack can be put into the installation box.
Replacement of faulty tire
The dimensions of the emergency spare tires and their
rims of this car are the same as those of the damaged
wheels.
After an emergency spare tire is mounted, the steering
performance of the vehicle will change. Please
control speed properly to avoid rapid acceleration and
emergency brake.
While driving, do NOT use more than one emergency
spare tire.
Preparatory Work
If you find that a tire is flat, you should slowly drive
the vehicle to a flat place where safe maintenance can
be performed so as to prevent further damage to the
tire and the rim. Also, put a warning triangle in a
suitable place behind the vehicle, and turn on the
emergency warning light.
To Next Page
Loading...
