Speed limit sign identification system *
Speed sign recognition system (TSR) uses camera to
detect the speed limit on the road or beside the road
and display it on the dashboard to help driver observe
the speed limit.
● TSR is a driving assistance function and
cannot be applied to all driving situations.
You must maintain control of your vehicle,
drive carefully and take full responsibility
for maintaining a safe and legal speed. If a
third-party navigation is used, the TSR will
not be able to read the speed from the
navigation unit.
Turn on/off speed limit sign recognition
The user can turn on/off the speed limit sign
recognition function through the infotainment screen
and set the alarm method.
After the vehicle passes the speed limit sign, the
instrument will display the speed limit information
within a certain driving distance. After the vehicle
passes the speed limit cancellation sign, the
instrument will display the speed limit cancellation
message (does not display the specific number). If the
cancel sign and the speed limit value of the next
section appear at the same time, the speed limit value
will be displayed directly.
● TSR detection performance is affected by
weather, illumination, and position lamp
restrictions on road signs.
TSR detection will be limited in the following
situations:
● Tilted/damaged signs.
● Signs on the curve.
● Signs that are completely/partially obscured or
improperly placed.
● Signs covered by ice, snow or thick dust.
Automatic emergency braking
Traffic sign identification
Alarm display + alarm sound
Integrated intelligent cruise
control
Forward collision warning
To Next Page
Loading...
