4. Unlock the buckle under the spare tire cover* and
remove the spare tire cover*.
5. Insert the key into the nut and remove the nut by
turning the key; Next, remove the other three
ordinary wheel nuts in turn.
6. Align the center hole of the replaced old tire with
the stud on the spare tire frame and place it
properly.
7. First, pretighten 3 nuts by hand, then if they are
ordinary wheel nuts, tighten them with a
tightening torque of (110±5) N•m; while if they
are equipped with wheel locking nuts, insert the
wheel locking key into the nuts at the correct
angle and tighten them with a tightening torque of
(50±3) N•m.
To Next Page
Loading...
