Window anti-pinch
For the window equipped with one-touch lift
function, the glass will move reversely in case of
obstacle, and the window will be opened downward.
If the anti-pinch reversal of the window is triggered
twice in a row, the one-touch window-lifting function
will be inhibited and can be restored by initialization
the window position.
Window position anti-pinch learning and
initialization
After the vehicle of the equipment four-door one-
touch power window is disordered (through OTA
upgrade or other upgrade) or the vehicle is powered
off, the anti-pinch learning of the window is required.
The specific methods are as follows:
1. Switch the Keyless Start/Stop button to "RUN"
mode and the engine is not started;
2. Operate the window to the top and stop for 2
seconds;
3. Operate the window for 2 seconds after it drops to
the bottom and stops;
4. Operate the window again to rise to the top and
stop for 2 seconds. The learning of this window
function is completed.
After the windows of the four doors manual learning
process is completed, check whether the automatic up
function is restored, if it is restored, the learning is
successful.
After the anti-pinch learning, if two consecutive anti-
pinch events occur, the one-button lifting function
will be inhibited, and the initialization operation is
required, that is, the manual gear position of the
switch is lifted to the top continuously, and the
function will resume to normal.
Closing window on rainy days *
To equip the four-door one-touch power window
vehicle, you can select whether to enable it through
the Infotainment screen>Vehicle settings > >
Window control > Rain closing windows. This
function is enabled by default. When the function is
turned on, the vehicle is locked, and the windows of
the four doors and sunroof are automatically turned
off if it rains. Windows of the four doors and sunroof
will also be closed automatically if it does not rain for
6 hours.
To Next Page
Loading...
