Balluff BVS HS-P Series - Page 183

183
www.balluff.com
3
Configuration Using Barcodes
Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
Data Matrix
DPM Decoding
Safety
This feature defines the tolerance of DPM decoding software to operate with poor quality labels.
Decoding Safety is used to configure a barcode symbology decoder to be very aggressive to very
conservative depending on a particular customer’s needs. Higher tolerance to poor quality labels
increases the reading capability of the reader.
See page 249 for more information on this feature.
NOTE
This feature is valid for the PD9530-DPM model only.
Data Matrix Decoding Safety = 1 (Aggressive)
Data Matrix Decoding Safety = 2
Data Matrix Decoding Safety = 3
Data Matrix Decoding Safety = 4
Data Matrix Decoding Safety =
5 (Conservative)
DEFAULT
CDMDA01(CR)
DMDA02(CR)
DMDA03(CR)
DMDA04(CR)
DMDA05(CR)