Balluff BVS HS-P Series User Manual

273
www.balluff.com
5
Appendix A: Technical Specifications
Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
5 Appendix A: Technical Specifications
The tables that follow contain Physical and Performance Characteristics, User Environment and
Regulatory information. Table Standard Cable Pinouts provides Standard Cable Pinouts.
Technical
Specifications
Item Description
Physical Characteristics
Dimensions
Height: 212 mm
Length: 110 mm
Width: 74 mm
Weight (without cable)
BVS HS-PC models: 330 gr (without cable)
BVS HS-PB models: 395 gr
Electrical Characteristics
BVS HS-PC models
Voltage & Current BVS HS-PC-HDW-MA-02 BVS HS-PC-DPW-MA-01
Input Voltage 5 VDC +/- 5% 5 VDC +/- 5%
Input Current
Operating (typical): 335 mA 350 mA
Operating (max): 475 mA 480 mA
Idle/Standby (typical) 180 mA 120 mA
BVS HS-PB models
Battery Type Li-Ion battery pack
Charge time for full charge from
full discharge
4 hours with external power supply adapter
a
a. Charge Times are much lower when battery is within daily typical operating condition.
Typical 10 hours with Host power (in this case no supply
adapter is needed)
a
Operating autonomy
(continuous reading)
30,000 reads (typical)
Cradle consumption and
DC
input supply range
Volt 10-30 VDC; Power <8W
b
;
Max 500 mA when in host/bus powered mode
b
.
b. Typical input current measured under factory default configuration.

Balluff BVS HS-P Series Specifications

General

Brand	Balluff
Model	BVS HS-P Series
Category	Barcode Reader
Language	English