78
3
Configuration Using Barcodes
Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
Stand Mode
Indication
This operation is useful for indicating when the reader is in Stand Mode. If enabled, the blue indi-
cator will blink when Stand Mode reading is active.
Pick Mode Specifies the ability of the reader to decode labels only when they are close to the center of the
aiming pattern. This allows the reader to accurately target labels when they are placed close
together, such as on a pick sheet.
Stand Mode Indication = Disable
Stand Mode Indication = Enable
NOTE
This feature is not compatible with Multiple Labels Reading in a Volume.
Pick Mode = Disable
Pick Mode = Enable