6.4 Abbreviations
The following table describes the abbreviations used on the sensor display and in this manual.
Abbreviation Description
No valid signal in range
The sensor has not been taught
One-shot
First
Multiple light
reflections
Second
Two-point TEACH (static background suppression)
Automatic
One-point background suppression
Button
Cancel
Complementary output
Display read
Delay
,
Output timing delay (Channel 1, Channel 2)
Dark operate
,
Delay timer (Channel 1, Channel 2)
Dual mode
Dynamic background suppression
End—exit the sensor menu
Far zero reference location—the maximum range is 0 and the measurement increase as the target
moves closer to the sensor
One-point window (foreground suppression)
Full range
Excess gain
High excess gain mode
High speed tracking
Light operate
Laser on
Q4X Stainless Steel Laser Sensor with Dual Discrete Outputs and IO-Link
38 www.bannerengineering.com - Tel: 763.544.3164
To Next Page
Loading...
