R5906167 /00 ImagePRO–4K Video Processor
10
2.1 General considerations
General safety instructions
• Before operating these devices please read this manual thoroughly and retain it for future reference.
• All warnings in the documentation manual should be adhered to.
• All instructions for operating and use of these devices must be followed precisely.
• All local installation codes should be adhered to.
Notice on safety
This equipment is built in accordance with the requirements of the international safety standards IEC60950-1,
EN60950-1, UL60950-1 and CAN/CSA C22.2 No.60950-1, which are the safety standards of information
technology equipment including electrical business equipment. These safety standards impose important
requirements on the use of safety critical components, materials and insulation, in order to protect the user or
operator against risk of electric shock and energy hazard and having access to live parts. Safety standards
also impose limits to the internal and external temperature rises, radiation levels, mechanical stability and
strength, enclosure construction and protection against the risk of fire. Simulated single fault condition testing
ensures the safety of the equipment to the user even when the equipment’s normal operation fails.
2.2 Certificates
CE mark
Image 2-1: CE mark
These products comply with the essential requirements of Council Directives 2004/108/EC or 2014/30/EU
(EMC), 2006/95/EC or 2014/35/EU (LVD) and 2011/65/EU (RoHS).
KCC statement (사용자안내문)
A급 기기 (업무용 방송통신기자재)
이 기기는 업무용(A급) 전자파적합기기로서 판매자 또는 사용자는 이 점을 주의하시기 바라며, 가정외의 지역
에서 사용하는 것을 목적으로 합니다.
Image 2-2: KCC mark
2.3 Important safety instructions
To prevent risk, personal injury, and ImagePRO–4K video processor damage
Please read this chapter carefully. It includes several cautions to prevent damage to Event Master devices.
Ensure that you understand and follow all safety guidelines, safety instructions and warnings mentioned in this
chapter before installing Event Master devices. After this chapter, additional “warnings” and “cautions” are
given depending on the installation procedure. Read and follow these “warnings” and “cautions” as well.
• Read and follow all installation and operation instructions.
• Only trained technicians may install ImagePRO–4K products.
• Only use attachments/accessories specified by the manufacturer.
• CAUTION: Troubleshooting must be performed by a trained technician. To reduce the risk of electrical
shock, do not attempt to service this equipment unless you are qualified to do so.
Safety
To Next Page
Loading...
