Barco ImagePRO - Backup Log Files

R5906167 /00 ImagePRO–4K Video Processor
86
Image 6-97: Temperature diagnostic results
2. Press the ESC key to return to the Diagnostics menu.
Backup Log Files
1. Insert a FAT32-formatted flash drive in the front-panel USB slot.
If there is no USB drive in the USB slot when you attempt to create backup log files, the system displays
the message “USB drive not found. Please check USB connection and retry.”
2. Scroll to and select Backup Log Files from the Diagnostics menu.
Image 6-98: Diagnostics menu: Backup Log Files
The system displays a progress screen.
Menu orientation