R5906167 /00 ImagePRO–4K Video Processor
6
1.1 About this guide
This manual
This user’s guide describes how to install and operate the ImagePRO–4K video processor. The user’s guide is
designed to be a reference tool in the everyday work of the user with the product. It contains a complete
description of the hardware components and the control software. The manual also includes all the necessary
instructions on how to upgrade firmware, install spare parts and perform any hardware upgrades.
Barco provides a 3-year parts and labor warranty for all hardware components. Please refer to
“Warranty”, page 123 for specific details regarding the warranty terms.
Available system documentation
This guide is part of the documentation set describing the ImagePRO–4K product.
Guide Article number
Quick Start Guide 26-1602004-00
User Guide R5906167
Service Guide R5906168 (Available only to Customer Service
partners)
Safety Guide R5906169
A printed copy of the safety guide and the quick start guide is included in the shipping box of the ImagePRO–
4K video processor. Please check online for the other documents.
Always check for the latest version of all documents on www.barco.com.
The latest versions of firmware and software can be found at www.barco.com or on
ftp://ftp.folsom.com.
1.2 Record of changes
Overview
Revision
Changes
00 Initial version
1.3 Symbols, pictures and fonts
Symbol overview
The following icons are used in the manual:
Caution
Warning
Info, term definition. General info about the term
Introduction
To Next Page
Loading...
