Safety 21
03/2016 CFPP Process Analyzer CFPP-4.2
The temperatures of components in the measuring cell housing activated are very deep.
Risk of skin damage on direct contact.
FOR THIS REASON:
- Before you touch a component, check, if it is not too cold.
- Wear protective gloves.
- Do not remove or put out of operation a safety device.
The analyzer contents components out of plastic:
Danger of explosions due to static discharge!
Cleaning plastic surfaces with a dry cloth can result
in static discharge.
Resulting sparks can ignite
potentially explosive atmospheres.
- Always clean plastic surfaces with a moist cloth.
Note: Detailed information for a safe use of the Chiller for Liquids you find in the
manual for the Chiller for Liquids.
To Next Page
Loading...
