2 Safety
ex
12 / 106
Subject to technical modifications
Revision A / 04/2019
2.2 Personnel qualifications
The following skills are required for handling the device:
Qualified electricians
• Professional training
• Knowledge and experience to
recognise and avoid risks that can
emanate from electricity
• Understanding of the overall system
• Special instruction for potentially
explosive atmospheres
• Understanding of the overall system
• Configuration/programming
• Understanding of programming
manuals
Warehouse and transport employees
• Loading and transport activities
• Correct storage
• Instruction by the operating company
on operation, changing and loading
the battery
• Special instruction for potentially
explosive atmospheres
Table 5 Personnel qualifications
2.3 Explosion protection
Incorrect use of the hand-held scanner and its accessories can trigger fires and explosions in potentially
explosive atmospheres.
Read the instructions in this Manual thoroughly and follow them when using the device.
In the event of an overlaps with user manuals from Zebra, the instructions in the BARTEC User Manual
apply. The BARTEC User Manual takes priority.
2.3.1 Using hand-held scanners and accessories
Always carry out an inspection prior to use (see Chapter 8.2).
Ensure that the application area corresponds to the explosion protection marking and permissible
ambient conditions (see chapter 14).
Remove the device from the potentially explosive atmosphere immediately in the event of a
malfunction or damaged enclosure.
Only use accessories specified by BARTEC in the potentially explosive atmosphere.
Have all maintenance work on and inspections of accessories conducted by authorised personnel.
Have all repairs to the hand-held scanner conducted by BARTEC.
To Next Page
Loading...
Need help?
General
