6 Configuration
ex
50 / 106
Subject to technical modifications
Revision A / 04/2019
6.4.4 Number of Bluetooth Connections (only for BCS 3678
ex
)
Connection with
connections
Comments
Base station Up to 7
Up to 7 BCS 3678
ex
can be connected to one base
station.
A point-to-point connection is activated in the basic
settings.
A multipoint connection can be activated via the
programming manual.
Chapter 4 "Radio Communications
Point-to-Point Mode: (Default)
Multipoint-to-Point Mode:
module (USM)
1
One hand-held scanner can be connected to a UVM.
A multipoint connection is not supported.
Bluetooth devices
Depends on the
used device
How many hand-held scanners can be connected to a
Bluetooth device depends on the Bluetooth module
installed.
Please refer to the product descriptions of your
Bluetooth enabled device for more details.
Table 45 Connection possibilities of the BCS 3678
ex
6.4.5 Unpairing the Bluetooth hand-held scanner
Scan the unpairing barcode with the hand-held scanner
The hand-held scanner is unpaired from the USM
Figure 17 Unpairing Barcode for bluetooth hand-held scanner
To Next Page
Loading...
Need help?
General
