6 Configuration
ex
48 / 106
Subject to technical modifications
Revision A / 04/2019
6.4 Functions
In terms of function, the hand-held scanners are based on the original Zebra models.
6.4.1 Comparison
BCS 3608
ex
DS3608-HP
ex
Table 44 Comparison with ZEBRA hand-held scanners
With a few exceptions, the functions can be applied one-to-one as with Zebra.
When implementing a HID solution, a software wedge application must be installed on the PC / host
when using a universal power supply module (not distributed by BARTEC).
The software wedge application serves to convert the incoming data as keyboard input and to enter
the data into the currently active field on the PC / host.
The complete list of all functions with a detailed functional description can be found in ZEBRA's
Product Reference Guide.
Some important functions are explained in the following chapters.
6.4.2 General Device Settings (User Preferences)
A variety of settings on how the device should behave can be made using the Zebra Product Manual
or the 123 Scan Utility.
Examples:
- Beeper - Adjusts the sound, duration, and volume of the beeper.
- Consumption Mode - Enables or disables the Low Consumption Mode.
- Trigger Mode - Sets various trigger modes such as "Standard", "Presentation", "Auto Aim"
and others.
- Selection List Mode - The Selection List mode allows the digital scanner to decode only
barcodes aligned below the LED target.
See the Zebra documentation for a complete overview.
Detailed and full list of information and programming barcodes about “user preferences”
can be found in Zebra product reference guide “chapter 5 – user preferences”.
To Next Page
Loading...
Need help?
General
