Bartec BCS 3600ex Series User Manual

Handscanner
BCS 3600
ex
series
4 Product description
Subject to technical modifications
Revision A / 04/2019
33 / 106
4.5 Meaning of LED display / beeps
4.5.1 Hand-held scanner
LED display
Colour
Beep sequence
Meaning
Status LEDs (on
switching on)
Green flashes
Low – medium –
high
Hand-held scanner is
switched on
Status LEDs (when
scanning)
Red
High (4 short beeps)
Transmission error
Data are ignored
Green
Medium
Barcode has been read
successfully
On Bluetooth hand-
held scanners:
Red
–
Battery charge less than 20 %
Yellow
–
Battery charge 20 - 50 %
Green – Battery charge over 50 %
On Bluetooth hand-
held scanners:
Red
Low (4 long beeps)
No Bluetooth pairing
Green
2 short beep
sequences
Paired to Bluetooth device
Table 28 Meaning of the LED display, hand-held scanner
When searching the scanner with the paired base station, the search LED on the scanner lights red for
zone 1 and blue for zone 2.
Other LED displays and beeps are described in the ZEBRA Product Reference Guide.
4.5.2 Base station
LED display
Meaning
Lights up green
Base station is switched on
Lights up blue Page button is pressed
Flashes yellow Battery is being charged
Flashes green
Battery has been fully charged
Flashes quickly, yellow
Fault during charging
Table 29 Meaning of the LED display, base station

Bartec BCS 3600ex Series Specifications

General

Brand	Bartec
Model	BCS 3600ex Series
Category	Scanner
Language	English