Bartec BCS 3600ex Series - Pre-Use Inspection and Scanning Best Practices

8 Operation
Handscanner
BCS 3600
ex
series
90 / 106
Subject to technical modifications
Revision A / 04/2019
8.2 Inspection to be conducted prior to use
DANGER
Spark formation
caused by the connection cable or the battery falling out
!
Explosion.

Ensure that the safety lock has been correctly closed prior to use in the potentially explosive
atmosphere.
The following risks are present if the safety lock on the underside of the hand-held scanner has not
been closed correctly:
‒ The battery on a Bluetooth hand-held scanner can fall out.
‒ The connection cable on a corded hand-held scanner can come unplugged.

Check the following points before operating the device:
Final inspection of BCS 3608
ex
-NI / BCS 3608
ex
-IS (corded)
Check points
Scan window free from damage, e.g. scratches
Enclosure free from damage, e.g. crack or break
Temperature in the area in which the hand-held scanner is used corresponds to the specified
temperature range
Cables are not damaged
Cables have been certified
Cable on the hand-held scanner is securely engaged and locked
Cables on the universal supply module are securely engaged, locked or screwed tight
Table 63 Final inspection before using the BCS 3608
ex
-NI / BCS 3608
ex
-IS (corded)
Final inspection of BCS 3678
ex
-NI / BCS 3678
ex
-IS (Bluetooth)
Check points
Scan window free from damage, e.g. scratches
Enclosure free from damage, e.g. crack or break
Temperature in the area in which the hand-held scanner is used corresponds to the specified
temperature range
Cables are not damaged
Cables have been certified
Battery has been certified
Battery compartment cover has been correctly locked
Cables on the universal supply module/base station are securely engaged, locked or screwed
tight
Table 64 Final inspection before using the BCS 3678
ex
-NI / BCS 3678
ex
-IS (Bluetooth)