Bartec BCS 3600ex Series - Construction of Base Station (Cradle)

4 Product description
Handscanner
BCS 3600
ex
series
30 / 106
Subject to technical modifications
Revision A / 04/2019
4.4.4 Construction of base station (cradle)
DANGER
Spark formation!
Explosion.

Only use the base station outside the potentially explosive atmosphere.
The function is only guaranteed if the base station you use for your configuration has been specified
by BARTEC (see system overview, Chapter 15.2).
The model is clearly indicated on the type label.
The base station charges the battery on the Bluetooth hand-held scanner and connects it to the host
PC.
Figure 11 Construction of the base station (cradle)
Pos.
Description
Function
1
Retainer
Holding the hand-held scanner in place in
the base station
2
Connection code (for connection to
BCS 3678
ex
-NI / BCS 3678
ex
-IS)
Establishing a connection between base
station and hand-held scanner
3
Holes
Water drainage
4
Drill holes
Mounting the base station to the wall
5
Contact
Charging the battery, transferring data
6 LEDs Displaying the status of the base station