Configuring the Camera
BASLER A102
f 4-17
DRAFT
Register Name: ISO EN / Continuous Shot
Offset from Base Address: 0x614
Field Bit Description
Continuous Shot 0 When the camera is set for video Format 2 or Format 7, this field con-
trols the “continuous shot” video transmission mode.
1 = start “continuous shot” transmission
0 = stop “continuous shot” transmission
Default = 0 on the A102f and A102fc
---
1 ... 31 Reserved
Register Name: Memory Save
Offset from Base Address: 0x618
Field Bit Description
Save 0 Writing a 1 to this field will cause the current settings in the work con-
figuration set (see Section 3.15) to be saved to the memory channel
specified in the Memory Save Channel register (see page 4-18).
(This register self clears.)
---
1 ... 31 Reserved
Register Name: One Shot / Multi Shot
Offset from Base Address: 0x61C
Field Bit Description
One Shot 0 When the camera is set for video Format 2 or Format 7, this field con-
trols the “one shot” video transmission mode.
1 = transmit one frame of video data
(Field is self cleared after transmission.)
Default = 0 on the A102f and A102fc
Multi Shot
1 Multi shot is not supported on the A102f or A102fc.
--- 2 ... 15 Reserved
Count Number 16 ... 31 The count number for multi shot is not supported on the A102f or
A102fc.
To Next Page
Loading...
Need help?
General
