Battenfeld UNILOG B2 - Page 116

A: R82GB0HA.PMD
B: R82DE0HA.PMD
E: 080403 / T.Wenger
G: 020403 / TCS
Section 7
Page 14
Maintenance
Object
refer to
Sect.
Work required
Frequency
Performance-
dependent
Time-dependent
Lubricants 7.2.1 Dispose
Repairs &
Servicing
Electronic components 7.2.2 Dispose
Repairs &
Servicing
Check for cleanness m
Check for tightness m
Check setting m
Check for cleanness m
Check for tightness m
Check setting if indicated
Indicator lamps 7.3.3 Replace
immediately if
defective
Door closed during
operation
Always
Clean m
Visual check w
Tighten terminals 2500h
Battery 7.3.5 Replace *when indicated
Condensate status -
check/empty
w
Eingangsdruck prüfen w
Clean condensate filter 3m
Test 3m
Check for tightness 3m
Test w
Check for tightness w
Check for leaks and
tightness
m
Check hoses * - 3m
Sound absorber 7.4.5 Check for dirt / Clean 3m
R8B2_GB127.XLS
7.4.4
Pneumatic system
(installed components)
7.3.4
* = Process materials required
7.4.1
7.4.2Pneumatic valve
7.4.3
Maintenance list
7.3.1
7.3.2
Pneumatic C-Axis
(valves)
Electro-mechanical limit
switches
Proximity switches
Control cabinet
Druckluftwartungseinheit