28 Servicing SIGMA Spectrum Infusion System
Manual 41018v0800 SIGMA Spectrum Infusion System
Revision B Operator’s Manual
SERVICING SIGMA SPECTRUM INFUSION SYSTEM
CAUTION Service Personnel Must be Trained by Baxter.
Servicing the SIGMA Spectrum Infusion Pump is restricted to
qualified, Baxter-trained, service personnel who employ Baxter
authorized parts and procedures. Use of other parts and servicing
procedures is prohibited.
CAUTION Perform Preventive Maintenance Annually.
Pumps should be tested for proper performance annually and also
whenever damage from drops, fluid intrusion and other causes is
suspected. See SIGMA Spectrum Infusion System Service Manual
(P/N 41019v0800) for complete information.
To check the correct functioning of alarms and operational safety of the device, have preventive
maintenance performed by qualified service personnel.
Refer to the SIGMA Spectrum Infusion System Service Manual (P/N 41019v0800) or contact
Baxter Technical Support for Pump service needs; including circuit diagrams, component part lists,
descriptions, calibration instructions, or other information. See “Contacting Baxter Technical
Support” on page 1.