Default Settings
304376-B Rev 00
E-3
Autonegotiation Enabled High Speed Flow Control Configuration
(page 3-32)
Flow Control Disabled
Note:
The following two fields only appear when a single Phy MDA with a separate redundant Phy port is
installed.
Preferred Phy Right
Active Phy Read-only field indicating the
operational Phy port (Right,
Left, or None)
Trunk Members blank field MultiLink Trunk Configuration
(page 3-36)
STP Normal
Trunk Mode Basic
Trunk Status Enabled
Trunk Name Trunk #1 to Trunk #6
Traffic Type Rx and Tx MultiLink Trunk Utilization (page 3-39)
Monitoring Mode Disabled Port Mirroring Configuration
(page 3-41)
Monitor Port Zero-length string
Port X Zero-length string
Port Y Zero-length string
Address A 00-00-00-00-00-00
(no MAC address assigned)
Address B 00-00-00-00-00-00
(no MAC address assigned)
Packet Type Both Rate Limiting Configuration
(page 3-45)
Limit None
VLAN 1 IGMP Configuration (page 3-48)
Snooping Enabled
Proxy Enabled
Robust Value 2
(continued)
Table E-1. Factory Default Settings for the BayStack 350 Switch (continued)
Field Default setting Appears in this CI screen
kombk.book Page 3 Thursday, February 18, 1999 10:59 AM
To Next Page
Loading...