BD Kiestra ReadA - Table of Contents

3
Table of Contents
1 Instructions for use guidance 5
1.1 Customer release notes 5
1.2 Conventions 5
1.3 Notes, cautions, and warnings 6
1.4 Symbols glossary 6
1.5 Depiction of patient information 8
2 Introduction 9
2.1 Intended use 9
2.2 Module startup 9
2.3 Module description 9
2.3.1 BDKiestra™ ReadA incubator 9
2.3.1.1 Audible alerts and visual indicators 9
2.3.1.2 Components 10
2.3.2 Plate flow within theBDKiestra™ ReadA incubator 12
2.3.3 BDKiestra™ ReadA software application 13
2.3.3.1 General application layouts 14
2.3.3.2 Application toolbar 17
2.3.3.3 Application button bar 20
2.3.3.4 Machine tab 21
2.3.3.5 Logging tab 22
2.3.3.6 Debug Log tab 23
2.3.3.7 Sensor Charts tab 23
2.3.3.8 CSA tab 24
3 Configuration 25
4 Operation 27
4.1 Turning on module 28
4.2 Signing in and out 29
4.3 Startingoperation 30
4.4 Stopping operation 31
4.5 Turning off module 32
5 Cleaning and maintenance 33
5.1 Cleaning and disinfection 33
5.1.1 Frequency of routine cleaning 34
5.1.2 Cleaners and disinfectants 34
5.2 Cleaning methods 34
5.2.1 Dry cleaning 35
5.2.2 Wet cleaning/disinfecting 35
5.3 Cleaning strategies for incubator interior 35
5.3.1 Protocol A: Cleaning all racks with automated unloading 36
5.3.2 Protocol B: Cleaning all racks with manual unloading 37
5.3.3 Protocol C: Cleaning selected racks 38
5.4 Cleaning and maintaining BDKiestra™ ReadA components 40
5.4.1 Door seals 40
5.4.2 External Surfaces 40