5.4.3 Humidification pan
The bottom plate inside the incubator houses the humidification pan. The humidification pan is
used to maintain adequate moisture levels for the plates in the ReadA.
1. Bottom plate of the incubator
2. Humidification pan
3. Pan fill mark
4. Pan fill port
5.4.3.1 Cleaning the humidification pan
An advanced user must sign in to the ReadA application in order to move module components
into proper position for cleaning the humidification pan.
Prepare the ReadA incubator
Figure 13 - Process vision container store
41
5 - Cleaning and maintenance
To Next Page
Loading...
