PN 177196BB
6-18
SAMPLE ANALYSIS
RUN-IN-PROGRESS, RESULTS LIST, AND RESULTS SCREENS
6.7 RUN-IN-PROGRESS, RESULTS LIST, AND RESULTS SCREENS
A Objectives
When you have completed this topic, you will be able to:
B Display both a Run-in-Progress screen and a Results screen.
B State the types of information found on both the Run-in-Progress and Results screens.
B State four features that are available on the Results screen but that are not available on
the Run-in-Progress screen.
B Locate the section that explains the instrument’s flags and messages in the Online Help
System or the Instructions for Use manual.
B Locate a sample result on the Results List screen.
B Explain how to print or transmit results from the Results List screen.
B References
1. In the Online Help System or the Instructions for Use manual, refer to:
r
Heading 9.1 LOCATING THE SAMPLE RESULTS.
r Heading 9.2 AFTER LOCATING THE SAMPLE RESULTS.
r Heading 9.4 PRINTING SAMPLE RESULTS.
r Heading 9.5, ARCHIVING PATIENT RESULTS.
r Heading 9.7 REVIEWING RESULTS.
r Heading 9.8 FLAGS AND MESSAGES GENERATED BY THE INSTRUMENT.
2. In Chapter 9, SUMMARY AND QUICK REFERENCE MASTERS, of this Training Guide,
locate and make a copy of the
SAMPLE RESULTS MANAGEMENT BEFORE ARCHIVING
SUMMARY
.
C Special Instructions
1. The instrument must be powered up.
2. During this topic you will be reviewing information on the Run-in-Progress screen and
comparing it to information on the Results screen. It is ideal if the last sample analyzed:
a. Is a patient sample.
b. Is run in the CBC/DIFF test panel.
c. Appears on the Results List screen without manual matching.
D Topic Notes and Tasks
Run-in-Progress Screen
1. From the Main Menu screen, click to display the Run-in-Progress screen.
2. The Run-inProgress screen displays the results of the last sample ran, whether that
sample was a background, a control, or a patient sample.
To Next Page
Loading...
Need help?
General
