Beckman Coulter COULTER ACT 5diff User Manual

PN 177196BB
3-13
SETUP OPTIONS
CONFIGURATION SAVE AND RESTORE SETUP OPTIONS
3
3.5 CONFIGURATION SAVE AND RESTORE SETUP OPTIONS
A Objectives
When you have completed this topic, you will be able to:
B Describe the options available from the Config. Save/Restore screen.
B Locate the procedures for saving and restoring the Analyzer and Workstation
configurations in the Online Help System or the Instructions for Use manual.
B Locate the procedure for deleting all or part of a patient database.
B References
In the Online Help System or the Instructions for Use manual, refer to:
r
Setup Menu Options under Heading 5.12 MENU PATHS
r Heading E.2 CONFIGURATION: ANALYZER AND WORKSTATION
C Special Instructions
1. The instrument must be powered up.
2. Either a Supervisor or Service must be logged in to access the setup options.
D Topic Notes and Tasks
1. Access the Config. Save/Restore screens.
From the Main Menu, click tt .
2. Point out the two tabs,
Configuration and Delete Database.
3. Click the
Configuration tab to display the Configuration screen.
a. The options in the Analyzer Configuration box allow you to save (and to restore if
necessary) the Analyzer Configuration settings.
1) It is recommended that you save the information to a floppy disk.
2) Service saves the Analyzer configuration to a floppy disk at installation.
3) To save or restore the Analyzer configuration, refer to the procedures,
Analyzer
Configuration: Save to Hard Disk/Save to Floppy Disk,
and Analyzer Configuration: Restore
from Hard Disk/Restore from Floppy Disk,
in Appendix E.8 of the Online Help
System or the Instructions for Use manual.
b. The options in the Workstation Configuration box allow you to save (and to restore
if necessary) the Workstation Configuration settings.
1) It is recommended that you save the information to a floppy disk.
2) Service saves the Workstation configuration to a floppy disk at installation.
3) To save or restore the Workstation configuration, refer to the procedures,
Workstation Configuration: Save to Hard Disk/Save to Floppy Disk, and Workstation
Configuration: Restore from Hard Disk/Restore from Floppy Disk,
in Appendix E.8 of the
Online Help System or the Instructions for Use manual.

Beckman Coulter COULTER ACT 5diff Specifications

General

Brand	Beckman Coulter
Model	COULTER ACT 5diff
Category	Laboratory Equipment
Language	English