PN 177196BB
5 of 8
TRAINING CHECKLIST
CHECKLIST
SAMPLE ANALYSIS
B Discuss worklist options.
B Discuss the workflow options available and do the workflow setup (refer to scenarios).
B Run patient samples in the Autoloader mode.
B Run patient samples in the Manual mode.
Comments:
_____________________________________________________________________________
_____________________________________________________________________________
_____________________________________________________________________________
DATA REVIEW
B Demonstrate how to locate samples on the Run-in-Progress screen.
B Demonstrate how to locate samples on the Results List screen.
B Demonstrate how to display the Results screen for a sample.
B Review the screen elements of the Results screen.
B Demonstrate how to locate samples in the archives.
B Discuss how to delete samples and patient files from the archives.
B Discuss sample association.
B Discuss the role of the Manual Match option in sample association.
B Demonstrate printing.
B Review normal sample results.
B Discuss each type of parameter flag or code that can be used on sample results, including
the DataPlot and Histogram flags.
B Discuss the instrument generated interpretive messages.
B Discuss the instrument generated analytical messages.
B Discuss the instrument generated quality assurance messages.
B Discuss the instrument generated miscellaneous messages.
Comments:
_____________________________________________________________________________
_____________________________________________________________________________
_____________________________________________________________________________
SPECIAL PROCEDURES/DIAGNOSTICS
Discuss the following, demonstrating a procedure or locating it in the Instructions for Use
manual whenever appropriate:
B Maintenance schedule
B Instrument logs
B System errors
B Hardware reset
B System diagnostics
To Next Page
Loading...
Need help?
General
